来宝网Logo

热门词:生物显微镜 水质分析仪 微波消解 荧光定量PCR 电化学工作站 生物安全柜

现在位置首页>行业专用>行业专用仪器/仪表>仪器> OME-DB-24PRD/24/DIN_OME-DB-24PRD/12/DIN电源继电器输出板OME

商品编号:75011
分享

OME-DB-24PRD/24/DIN_OME-DB-24PRD/12/DIN电源继电器输出板OME

价    格:询价

产    地:美国更新时间:2019/9/11 7:42:53

品    牌:欧米茄型    号:OME-DB-24PRD/24/DIN

状    态:正常点击量:37

15221105376
联系我时,请说明是在来宝网上看到的,谢谢!

上海茂培电子科技有限公司

联 系 人:范先生

电     话:15221105376

传     真:

等     级: (第 4年)

性     质:贸易型,

联系我时请说在来宝网上看到的,谢谢!




OME-DB-24PRD/24/DIN_OME-DB-24PRD/12/DIN电源继电器输出板OMEGA

OME-DB-24PR 24通道功率继电器输出板由8个C型和16个A型机电继电器组成,通过编程控制有效地切换负载。每个继电器的触点可以在250 Vac/30 Vdc下控制5 A负载。通过向50针opto-22兼容连接器、37针d-sub连接器(仅限OME-DB-24PRD)或20针扁平电缆连接器(仅限OME-DB-24PR)上的相应继电器通道施加5电压信号,使继电器通电。24个发音器LED,每个继电器一个,在相关继电器激活时亮起。为避免电脑电源过载,此板需要+12 Vdc或+24 Vdc外部电源。


产品参数

OME-DB-24PRD/24/DIN_OME-DB-24PRD/12/DIN电源继电器输出板OMEGA

Specifications

RELAY

Nominal Load: 50 A/250 Vac, 5 A/30 Vdc

Maximum Switching Power: 0.1 HP

Maximum Switching Voltage: 270 Vac, 150 Vdc

Maximum Switching Current: 5 A

Life Expectancy: Mechanical (2 x 107),

Electrical (3 x 104)

Time Value: (10 ms)

Control Logic: Input TTL high (+5 V), relay on

Power Consumption:

24 [email protected] A maximum; 5 V @ 0.2 A maximum

Operating Temperature: 0 to 60°C (32 to 140°F)

Storage Temperature: -20 to 70°C (-4 to 158°F)?

Dimensions: 210 H x 130 mm W (8.3 x 5.1")

Humidity: 5 to 90% RH non-condensing



产品介绍

OME-DB-24PRD/24/DIN_OME-DB-24PRD/12/DIN电源继电器输出板OMEGA

Accepts 20-Pin Connector (OME-DB-24PR Only) to Control 8 Form C and 8 Form A Relays

Switch up to 5A at 250 Vac /5A at 30 Vdc

Includes Varistor to Protect Each Channel Against High Voltage Spike

Screw Terminals for Easy Field Wiring

50-Pin Header Connects Directly to OME-PIO-D24,?

OME-PIO-D48, OME-PIO-D96, OME-PIO-D144 or Other OPTO-22 Compatible Board

20-Pin Header (OME-DB-24PR Only) Connects Directly to OME-A-82XPG Series or OME-PCI-1800 Series

37-Pin D-Sub Connector (OME-DB-24PRD Only) Attaches to OME-PIO-D24, OME-PIO-D48,

OME-PIO-D56, OME-PIO-D96 or OME-PIO-D144 Boards

The OME-DB-24PR 24-Channel power relay output board consists of 8 form C and 16 form A electromechanical relays for efficient switching of loads by programmed control. The contact of each relay can control a 5 A load at 250 Vac/30 Vdc. The relay is energized by applying a 5 voltage signal to the appropriate relay channel on the 50-pin OPTO-22 compatible connector, 37-pin D-sub connector (OME-DB-24PRD only) or 20-pin flat cable connector (OME-DB-24PR only). Twenty-four enunciator LED ’s, one for each relay,light hen their associated relay is activated. To avoid overloading your PC ’s power supply,this board needs a +12 Vdc or +24 Vdc external power supply.?




猜你喜欢
急冻钻石电子