來寶網Logo

熱門詞:生物顯微鏡 水質分析儀 微波消解 熒光定量PCR 電化學工作站 生物安全柜

現在位置首頁>自動化儀器儀表>流量儀表>流量計> FL-3403G_FL-3403ST_FL-3404ST-HRV_FL-3404G轉子流量計OMEG

商品編號:75190
分享

FL-3403G_FL-3403ST_FL-3404ST-HRV_FL-3404G轉子流量計OMEG

價    格:詢價

產    地:美國更新時間:2020/5/30 16:27:39

品    牌:歐米茄型    號:FL-3403G

狀    態:正常點擊量:197

13818656227
聯系我時,請說明是在來寶網上看到的,謝謝!

上海茂培電子科技有限公司

聯 系 人:孫女士

電     話:13818656227

傳     真:

等     級: (第 5年)

性     質:貿易型,

聯系我時請說在來寶網上看到的,謝謝!




FL-3403G_FL-3403ST_FL-3404ST-HRV_FL-3404G轉子流量計OMEGA

±2% FS Accuracy

Non-Rotating Seal Spindle

Easy-to-Read Scale Design

Special Dimensions for Interchangeability


The OMEGA? precision variablearea rotameters can measure flows of air, water, and gases, with up to ±2% FS accuracy and 0.25% FS repeatability (models ending in "07" or "45" have ±5% FS accuracy). These units feature an easy-to-read millimeter scale and come with correlation charts for air and water. The scale is fused on the metering tube in 1 mm (3/32") increments, which enables a user to read the flow rate with the highest accuracy.

The scale design, in which a vertical line runs through the length of the scale and intersects the horizontal scale divisions, reduces parallax and eye fatigue, thus ensuring highaccuracy readings (see inset, next page). The front polycarbonate resin shield is also curved to act as a magnifying glass, which yields superior performance over other rotameters with standard designs.

Non-Rising Stem Needle Valve



產品參數

FL-3403G_FL-3403ST_FL-3404ST-HRV_FL-3404G轉子流量計OMEGA

尺寸為150 mm的流量計也可配備用于特殊應用的非升桿式針閥。這種15圈的計量閥具有優越的流量控制,特別適用于色譜分析應用。滑動錐形針機構實際上消除了由于流體中的異物而引起的粘附或堆積,而不會改變或鋸齒狀的流速。


加壓系統屏蔽


這些轉子流量計,帶有精密鉆孔的硼硅酸鹽玻璃計量管,完全可以防止破裂。白色不透明的后擋板提供了背景,以幫助識別浮動位置。


面板安裝設計


這些轉子流量計配有水平端口和NPT螺紋,便于面板安裝。端口有外螺紋,并配有面板固定螺母。不需要額外的安裝硬件。只需鉆兩個孔,間距為114 mm(4.500”)(中心到中心),用于65 mm裝置,間距為224 mm(8.813”)(中心到中心),用于150 mm裝置。每個孔的直徑應為16 mm(5/8”)



產品介紹

FL-3403G_FL-3403ST_FL-3404ST-HRV_FL-3404G轉子流量計OMEGA

The OMEGA? precision variablearea rotameters can measure flows of air, water, and gases, with up to ±2% FS accuracy and 0.25% FS repeatability (models ending in "07" or "45" have ±5% FS accuracy). These units feature an easy-to-read millimeter scale and come with correlation charts for air and water. The scale is fused on the metering tube in 1 mm (3/32") increments, which enables a user to read the flow rate with the highest accuracy.

The scale design, in which a vertical line runs through the length of the scale and intersects the horizontal scale divisions, reduces parallax and eye fatigue, thus ensuring highaccuracy readings (see inset, next page). The front polycarbonate resin shield is also curved to act as a magnifying glass, which yields superior performance over other rotameters with standard designs.

Non-Rising Stem Needle Valve

The 150 mm size flowmeters are also available with a non-rising stem type needle valve for special applications. This 15-turn metering valve has superior flow-rate control, and is particularly suited to use in chromatography applications. The sliding tapered-needle mechanism virtually eliminates sticking or buildup due to foreign matter in the fluid stream, without variations or saw-toothing of the flow rate.

Shielded for Pressurized Systems

These rotameters, with precisionbored borosilicate glass metering tubes, are fully shielded against breakage. A white opaque rear shield provides a background to aid in discerning the float position.

Panel Mounting Design

These rotameters are equipped with horizontal ports and NPT threads for easy panel mounting. The ports have external threads and are equipped with panel retaining nuts. No additional mounting hardware is required. Simply drill 2 holes 114 mm (4.500") apart (center to center) for 65 mm units, 224 mm (8.813") apart (center to center) for 150 mm units. Each hole should be 16 mm (5/8") in diameter.




猜你喜歡
急冻钻石电子
2015年股市大盘 下载贵阳捉鸡麻将免 重庆快乐十分钟走势图 乐彩5分赛车计划免费 北京极速赛车 足球比赛比分赔率 河北20选五今晚开奖结果 股票上证指数 湖南麻将吧 最近股票大跌的原因 广东十一选五全天计划 国标麻将是哪个地区的 广东11选五走势图规则 36选7分析 上海麻将胡牌牌型图解 河北十一选五遗漏查