来宝网Logo

热门词:生物显微镜 水质分析仪 微波消解 荧光定量PCR 电化学工作站 生物安全柜

山东博科
现在位置首页>行业专用>行业专用仪器/仪表>仪器>DP6060-6R4_DP6060-6R5_DP6060-6R7过程面板仪表OMEGA
DP6060-6R4_DP6060-6R5_DP6060-6R7过程面板仪表OMEGA
DP6060-6R4_DP6060-6R5_DP6060-6R7过程面板仪表OMEGA
  • DP6060-6R4_DP6060-6R5_DP6060-6R7过程面板仪表OMEGA

DP6060-6R4_DP6060-6R5_DP6060-6R7过程面板仪表OMEGA

产品报价:询价

更新时间:2019/10/10 7:41:51

地:美国

牌:欧米茄

号: DP6060-6R4

厂商性质: 贸易型,

公司名称: 上海茂培电子科技有限公司

产品关键词: DP6060-6R7   DP6060-6R5   DP6060-6R4   过程面板仪表   omega  

25
访问人数
0
累计评论


DP6060-6R4_DP6060-6R5_DP6060-6R7过程面板仪表OMEGA

00.jpg

DP6060-6R4_DP6060-6R5_DP6060-6R7过程面板仪表OMEGA

模块化USB、RS232、RS485串行通信选项?#22270;?#30005;器


数学函数:加、差、平均、乘、除、最小、最大、加权平均、比?#30465;?#27987;度等


0至20毫安、4至20毫安、0至5伏、1至5伏和±10伏输入


大?#36864;?#32447;6位显示器,15和12毫米(0.60和0.46英寸)


阳光可?#26009;?#31034;模型


NEMA 4X(IP65)前部


通用85至265伏交流电或12/24伏直流输入电源型号


隔离24伏直流@200毫安发射机电源


操作、监控和编程的免费软件




DP6060系列过程仪表结合了两个独立编程的模拟输入和?#30475;?#30340;数学功能,使先进的仪表能够处理过程工业中常见的复杂数学要求。各?#36136;?#23398;函数可应用于输入,包括加法、差分、平均、乘法、除法、比率等。可自定义的双线显示?#24066;?#26681;据应用程序需要显示各?#36136;?#20837;变量、数学计算或单位和标记。阳光可?#26009;?#31034;模型有一个非常明亮的LED显示屏。DP6060有两个红色LED显示屏,一个高15 mm(0.60?#20445;?#30340;上显示屏和一个高12 mm(0.46?#20445;?#30340;下显示屏。每个显示器都是一个完整的6位数字(-99999到999999)。显示器可以设置为读取输入通道(A或B)、数学函数通道C、在A和B、B和C、A和C、A和B和C之间?#35874;弧?#22312;通道A、B或C和单位之间?#35874;弧?#20219;何通道的最大/最小值,包括数学通道(C)、设定点、总(无皮重)或净(带皮重)和通道A或B的总值,或modbus输入。没有可供输入选择的跳线。所有设置和编程都通过前面板完成。三级密码保护有助于保?#30452;?#31243;的可靠性。复制功能用于在大约20秒内将所有设置从一个DP6060复制(或克隆)到其他米!复制功能是所有仪表的标准功能。它不需要通信适配器,只需要一个可选的电缆组件。dp6060通过自动检测已安装的选项来确定所需的菜单导航来最小化菜单选择。

DP6060-6R4_DP6060-6R5_DP6060-6R7过程面板仪表OMEGA

General Specifications

Display: Both displays are 6 digits (-99999 to 999999), red LEDs with leading zero blanking

    Upper Display: 15 mm (0.60") high

    Lower Display: 12 mm (0.46") high

Display Intensity: 8 intensity levels

Display Update Rate: 5/second (200 ms)

Overrange: Display flashes 999999

Underrange: Display flashes -99999

Display Assignment: The upper and lower displays may be assigned to process values for Channels A (Ch-A), B (Ch-B), or C (Ch-C), toggle between (Ch-A & Ch-B, Ch-A & Ch-C, Ch-B & Ch-C, and Ch-A, Ch-B, & Ch-C), toggle between Channel and units, show channel gross value (no tare) or toggle net (tare) and gross values, show relay set points, max and min values, or Modbus input; the second display may also be set to show engineering units or be off, with no display

Front Panel: NEMA 4X (IP65)

Programming Methods: 4 front panel buttons, digital inputs, PC and software, Modbus registers, or cloning using copy function

Noise Filter: Programmable from 2 to 199 (0 will disable filter)

Filter Bypass: Programmable from 0.1 to 99.9% of calibrated span

Recalibration: Calibrated at the factory. Recalibration is recommended at least every 12 months

Max/Min Display: Max (peak)/min (valley) readings reached by the process are stored until reset by the user or until power to the meter is cycled

Password: 3 programmable passwords restrict modification of programmed settings; Pass 1: Allows use of function keys and digital inputs; Pass 2: Allows use of function keys, digital inputs and editing set/reset points; Pass 3: Restricts all programming, function keys, and digital inputs

Non-Volatile Memory: All programmed settings are stored in non-volatile memory for a minimum of ten years if power is lost

Power Options: 85 to 265 Vac 50/60 Hz, 90 to 265 Vdc, 20 W maximum, or jumper selectable 12/24 Vdc ±10%, 15 W maximum

Fuse (External, Required): UL recognized, 5 A maximum, slow blow; up to 6 meters may share one 5 A fuse

Isolated Transmitter Power Supply: 24 Vdc ±5% @ 200 mA maximum (standard), (12/24 Vdc powered models rated @ 100 mA maximum); 5 or 10 Vdc @ 50 mA maximum, selectable with internal jumper J4

Normal Mode Rejection: Greater than 60 dB at 50/60 Hz

Isolation: 4 kV input/output-to-power line; 500 V input-to-output or output-to-P+ supply

Overvoltage Category: Installation overvoltage category II; local level with smaller transient overvoltages than installation overvoltage category III

Operating Temperature Range: -40 to 65°C

Storage Temperature Range: -40 to 85°C

Relative Humidity: 0 to 90% non-condensing

Connections: Removable screw terminal blocks accept 12 to 22 AWG wire, RJ45 for external relays, digital I/O, and serial communication adapters

Enclosure: 1/8 DIN, high impact plastic, UL 94V-0, color: black

Mounting: 1/8 DIN panel cutout required: 92 x 45 mm (3.622 x 1.772"); two panel mounting bracket assemblies are provided

Tightening Torque: Screw terminal connectors: 5 lb-in (0.56 Nm)

Overall Dimensions: 119 W x 62 H x 143 mm D (4.68 x 2.45 x 5.64")

Weight: 269 g (9.5 oz)




急冻钻石电子